Sloop Weathervane – Weathervanes Made in USA

Introducing the Copper 3D Sloop Weathervane, proudly made in the USA with only the finest materials. This exquisite weathervane is perfect for any home or office and adds a classic touch of nautical charm to your decor. The detailed sailboat design features strong copper construction and a beautiful finish that adds an elegant touch to your cupola, boat house, and other outdoor spaces. Bring the beauty of the ocean into your home and enjoy this striking piece of craftsmanship!

Weathervane Product Information

Purchase includes the weathervane figure, spacer balls, directionals, rod and ring.

W eatherane Mounts and Cupolas are sold separately.

Weathervane Approximate figure dimensions: 33"L X 24"H
Add approx. 10" to dimension height for directionals and spacer balls
Directional Dimensions: 18"L with 3" lettering
Weathervane Options: natural or patina copper // standard or scrolled directionals

Please note: cupolas and weathervane mounts are sold separate.
Our sailboat weathervanes fit all weathervane mounts and cupolas offered on our site.

Our Sloop/Sailboat Weathervane comes ready to fit any of our cupolas we sell. To mount the weathervane into one of our cupolas all you have to do it put the solid ¾”weathervane rod down through the top of the cupola and through an internal crossmember inside the roof of the cupola. Use a little caulking around the hole to seal the rod and cupola together.

Our larger cupolas have a clamp under the crossmember so that it can lock the rod in place under the cross member. If you are not using a cupola with our weathervane then please check out our many types of brackets, stands and mounts on our mounts page. If an extended rod is needed to add more height or depth, please use a red thread locker such as Loctite or other brand.

Weathervane Finish

Natural Copper - Our copper weathervane are real copper and will age to a natural patina overtime. The weatherane will turn brown, black, and then patina green. The speed process for which it will patina is competed in accordance with Mother Nature's Wishes. Normally within about 5-7 years it should have a nice green patina forming.

Patina Copper Weathervane

We apply two – three or even four coats of patina chemical to your copper weathervane to give it an instant aged patina look.

After we get a solid looking patina, we add a clear coat glue sealant over the patina so that the patina will adhere to the metal better over time. Each weathervane patina can be slightly different in color, but your weathervane will turn a darker patina over a few weeks as it sits out in the elements.

Please note that patina is not paint – it is an accelerated acid wash solution we apply to help the speed up process of patina to the copper.

Clear Industrial Polyurethane on Copper Weathervane

If selected at checkout, we will apply three coats of Clear Industrial Polyurethane to your weathervane so that the copper will not change colors from brown, black to patina. This Clear Industrial Polyurethane will help keep your weathervane looking new.

This Industrial Polyurethane process can also be done by the weathervane owner by purchasing the industrial polyurethane from a supplier. You can find industrial lacquer from numerous sources.

Every few years you will need to reapply an industrial polyurethane to your weathervane and weathervane parts to keep it looking new.

Over time if not reapplied, mother nature will wear off the industrial polyurethane and change your copper with the elements to a natural patina green. This change will be based on where your weathervane location is located. The warmer states tend to speed up this process so you may have to reapply your clear industrial lacquer every few years to avoid the changes mother nature wishes to make.

Weathervane Mounting

A cupola is the strongest mounting option for any weathervane. If not using a cupola, we do have a variety of mounts to fit your particular weathervane placement.

BHP006 Adjustable Mount – This mount is made of a black powder coated aluminum. It is the most popular mount we carry because it is versatile and an easy install. It can adjust to any degree roof pitch, and can be used on a variety roof lines, ranging from a flat surface to some of the steepest pitches.

BHP003 Black Steel Powder Coated Eave Mount – This mount is black powder coated steel. It is designed to be installed on a flat vertical surface – such as the fascia board, the house siding, the side of a post, the side of a deck, or more!

BHP016 Black Steel Powder Coated Post Mount – Made of black powder coated steel, this mount is designed for flat surfaces. Keep in mind that the base measures 4” L x 4” W. Some potential placements include a 4x4 fence post, a mailbox post, on a deck railing, or even on top of a cupola with a 4” flat top.

BHP009 Extended Adjustable Mount – This mount is made of black powder coated aluminum and sometimes called a ridge vent mount. Much like the adjustable roof mount, this extended mount provides even more possibilities for roof lines. It is made for uneven roofing situations such as cedar shake or over ridge vents. It also works well with cupolas that don’t have the weathervane bracing support system built into the cupola roof – this mount can fit right over it.

BHP020 – Black Steel Powder Coated Extended Eave Mount – Made of black powder coated steel, this mount has a longer arm than the BHP003 Eave Mount. It holds your weathervane farther from the mounting surface. It is perfect for mounting on the fascia board, or even underneath it, depending how far the soffit juts out.

BHP017 Stainless Steel Post Mount – This stainless steel mount is perfect for flat surfaces. Keep in mind that the base measures 4” L x 4” W. Some potential placements include a 4x4 fence post, a mailbox post, on a deck railing, or even on top of a cupola with a 4” flat top. In use, it is identical to its steel twin, BHP016, but this stainless steel version does well around salt water and wet environments.

BHP048 Black Steel Powder Coated Three Prong Mount – This mount is made with black powder coated steel, and it has three prong legs. These legs are manually adjusted by the installer to fit the pitch of the roof. This mount may be referred to as a hexagon mount, and it does well with a three-sided gazebo or turret.

BHP044 Black Steel Powder Coated Four Prong Mount – This black powder coated steel mount is made with four legs. These legs need to be adjusted manually by the installer to match the desired roof pitch. It is a great turret mount. This mount can also go on cupolas that weren’t crafted with a weathervane balance support system inside its roof.

BHP013 Stainless Steel V Mount – This mount is a heavy-duty version of the BHP006 Adjustable Mount. It is made of stainless steel with two prongs. The legs need to be manually bent by the installer to match the desired roof pitch. The stainless steel construction makes this mount great for use around salt water or wet environments.

BHP021 Stainless Steel Extended Eave Mount - Made stainless steel, this mount has a longer arm than the BHP014 Eave Mount. It holds your weathervane farther from the mounting surface. It is perfect for mounting on the fascia board, or even underneath it, depending how far the soffit juts out. It is identical to its steel counterpart, BHP020, but the stainless steel construction of this mount makes it great around salt water or wet environments.

BHP046 Stainless Steel Four Prong Mount – This mount is identical to its steel counterpart, BHP044, but this stainless steel construction makes this mount durable around salt water or wet environments. This has four legs, which need to be manually bent by the installer to match the roof pitch. It is a great turret mount and can be used with cupolas not designed to hold a weathervane in its roof.

BHP047 Stainless Steel Four Prong Mount – This mount is identical in function to its steel counterpart, BHP048, but this stainless steel construction makes the mount great around salt water or wet environments. This mount has three prong legs, which need to be manually adjusted by the installer to fit the roof pitch. This mount may be referred to as a hexagon mount, and it does well with a three-sided gazebo or turret.

Weathervane is Made to order in Eddington Maine

This weathervane is made here in Eddington Maine by hand hammering it into a form using 16oz copper/ 24 gauge. This weathervane is real copper and will turn brown, black and then a green patina over time. If you choose to keep the weathervane shiny, you can always apply a clear coat of exterior poly urethane over the weathervane figure and weathervane parts to keep it from changing. Our main Weathervane Retail Shop is located in Trenton Maine on route 3 headed towards Bar Harbor and Acadia National Park. Made in Maine.

Weathervane Figure - Made in the USA.

Be sure to check out our Sailboat Weathervanes, Sun and Moon Weathervanes , Cat Weathervanes and Dog Weathervane pages since these are the fan favorites, also follow our Weathervane Blog for Shed Cupolas and Weathervane Updates.

We offer a 12 month warranty on everything sold in our store. We manufacture all of our weathervanes here in Maine and are proud to say our products meet the highest quality standards. Each piece is handmade and can have small imperfections which are part of the charm of having a one of the kind weathervane made just for you. Our warranty covers 12 months for any and all manufactures defects to your Weathervane Factory, sloop sailing ship weathervane, parts, cupolas, other items sold in our store. Not covered, tarnishing of copper, other acts of mother nature such as flying tree limbs, hurricanes, tornadoes, hail damages, any other acts of mother nature not addressed. Really – if you have an issue, we will do our best to help you resolve the issue, even it is past the warranty date, give us a call – we are a family business and pride ourselves in being user friendly. We will do our best to help any issues that may arise.