Squirrel Weathervane - Made in USA
This squirrel weathervane purchase includes the copper figure, copper spacer balls, the directionals, rod and ring. Our squirrel weathervane figure is made in the USA from 16 ounce copper, each piece is hammered and bent to form a unique piece of masterful copper squirrel weathervane art that will last for years to come.
- Squirrel Weathervane Approximate figure dimensions: 24"L X 13"H
- Add approx. 10" to dimension height for directionals and spacer balls
- Directional Dimensions: 18"L with 3" lettering
- Squirrel Weathervane Options: natural or patina copper // standard or scrolled directionals
Please note: cupolas and weathervane mounts are sold separate.
Our squirrel weathervanes fit all mounts and cupolas offered on our site.
Also this squirrel weatherane comes ready to fit any of our cupolas we sell. To mount the squirrel weathervane into one of our cupolas all you have to do it put the solid ¾”weathervane rod down through the top of the cupola and through an internal crossmember inside the roof of the cupola. Use a little caulking around the hole to seal the rod and cupola together.
Our larger cupolas have a clamp under the crossmember so that it can lock the rod in place under the cross member. If you are not using a cupola with our weathervane then please check out our many types of brackets, stands and mounts on our mounts page. If an extended rod is needed to add more height or depth, please use a red thread locker such as Loctite or other brand.
Our squirrel weathervane is made here in Eddington Maine by hand hammering it into a form using 16oz copper/ 24 gauge. The weathervane is real copper and will turn brown, black and then a green patina over time. If you choose to keep the Weathervane shinny, you can always apply a clear coat of exterior poly urethane over the weathervane figure and squirrel weathervane parts to keep it from changing. Our main Weathervane Retail Shop is located in Trenton Maine on route 3 headed towards Bar Harbor and Acadia National Park. Made in the Maine,
Squirrel Weathervane Figure - Made in the USA.
For Patina Copper -- Patina acid is applied via spray/brush to accelerate the aging process. Applied patina look will vary on each squirrel weathervane.