Pick the Right Cupola and Add Beauty to Your Landscape

A unique shed cupola can make a great investment and enhance your landscape while keeping your property ventilated during the hot summer months. These little structures placed atop buildings can provide beautiful ornamentation to the landscape. So before you buy any shed cupolas, here are some tips for you to choose the right one based on your requirements.

Cupolas are made of various materials, and which will work best for you depends on the climate where you live. Vinyl and copper shed cupolas with a copper roof and wrapped copper louvers are best for windy and coastal applications. A beautiful platina will be created on the copper by the moist salt air, and the vinyl board construction can also withstand the harsh ocean breezes. These types of shed cupolas are maintenance-free. You can find vinyl cupolas in various designs that are uniquely crafted to enhance your landscape.

Installing a Shed Cupola

The installation of the shed cupola will depend on the pitch of your roof, the shape of the cupola, and the purpose. If used for ventilation, you need to cut an opening in your roof while leaving 5-6 inches around the inside perimeter of your cupola base. Make sure you apply proper caulking. Most manufacturers provide cupolas with an installation guide that will provide you with a proper step-by-step guide about the installation.

How to Choose the Right Size?

Although cupolas are an enhancement on your roof, you should not overwhelm them. A basic rule of thumb is that for every foot of shed width, you need to have around one to one-and-half inches of cupolas. Check if the manufacturer provides a couple of size charts for different building sizes, which would give you guidance on choosing the right size cupola.

Know the Parts of a Shed Cupola

Base: The size of the base will depend on the pitch of your roof, which is the measurement of rise over run. It can be determined by using a digital angle gauge. In the US, the range of pitches usually falls between 4/12 and 9/12. The rule is to figure out one to one and a half inches of cupola base for every foot of unbroken roofline.

Vent housing: This square or cube section holds the vents and is usually affixed to the base with a sill and topped with a soffit. The opening on all four sides is the same width and requires a mitered frame to hold the equally sized vinyl or metal louvered vents, which can be either prefabricated or hand-metered slats.

Cap: The base of the cap is attached to the soffit of the vent housing.

To Conclude

You can get a cost-effective shed cupola through an experienced cupola distributor. Look for a manufacturer who has been creating custom shed cupolas for years. Ensure you get high-quality, maintenance-free, low-cost shed cupolas from a trusted distributor. You may also browse through customer reviews on their page and check if they have any pricing offers.

Featured Image Source: https://cdn11.bigcommerce.com/s-w8g2lva4p6/images/stencil/640w/products/2217/7790/cupolanorthlake3184__76191.1678304210.jpg?c=1